Nerjaveèi asye bann
Enfòmasyon de baz
✔ 304 bann asye pur gen yon pakèt itilizasyon.Kit alantou kay la oswa nan kwizin nan, oswa ou se yon antouzyast brikoleur, ou ka prepare kèk paske w ap toujou sèvi ak yo.
✔ 304 bann asye pur yo fèt ak asye pur 304 prim ki gen ekselan pèfòmans korozyon ak rezistans rouye epi li trè popilè pandan lavi chak jou.
✔ Nerjaveèi asye pur yo gen elastisite segondè, bon severite, ou ka fasilman pliye li epi bann asye pur yo ka koupe, komanse fouye, soude, oswa fòm nan divès pati.
✔ Ou pral jwenn 10 moso fèy asye pur ki gen 12 pous nan longè, 1 pous nan lajè, 0.024 pous epesè, ak yon kouvèti pwoteksyon PVC dekale ki asire yon bò pral gen yon fini glas.
✔ Stock shim asye pur lajman ki itilize nan brikoleur, machin presizyon, fabrikasyon mwazi, fabrikasyon pyès ki nan konpitè, ak filler espas kwizin ak elatriye.
BENEFIS nan asye pur
Nerjaveèi se yon pwodwi jeni popilè, ak itilizasyon materyèl sa a nan jeni se komen.Avèk ekselan rezistans korozyon ak kapasite siperyè D, bann asye pur jwenn itilizasyon toupatou atravè endistri.Aplikasyon tipik yo enkli sektè mache tankou otomobil, HVAC (chofaj, vantilasyon, èkondisyone), pwodui chimik, pwosesis manje, refrijerasyon ak konstriksyon.
ITILIZE DIFEREN
Chak klas ofri diferan karakteristik pèfòmans.Egzanp yo enkli 301 Nerjaveèi, ki se yon klas austenitic yo itilize nan fòme sous dlo san yo pa bezwen plis tretman chalè.304 Nerjaveèi se ki pa mayetik nan eta a rkwit epi li itilize nan stampings ak pati trase.
Karakteristik
304 bann asye pur gen yon pakèt itilizasyon.Kit alantou kay la oswa nan kwizin nan, oswa ou se yon antouzyast brikoleur, ou ka prepare kèk paske w ap toujou sèvi ak yo.
Bann asye pur 304 yo fèt ak asye pur 304 ki gen ekselan pèfòmans rezistans korozyon ak rouye epi li trè popilè pandan lavi chak jou.
Nerjaveèi asye eetal shims yo nan elastisite segondè, severite bon, ou ka fasilman pliye li ak bann yo asye pur ka koupe, komanse fouye, soude, oswa fòm nan divès pati.
Stock shim asye pur lajman ki itilize nan brikoleur, machin presizyon, fabrikasyon mwazi, fabrikasyon pyès ki nan konpitè, ak filler gap kwizin ak ect.
Ou pral jwenn 10 moso plak asye pur fèy metal ki se 12 pous nan longè, 1 pous lajè, 0.024 pous epesè, ak yon kouvèti PVC dekale pwoteksyon ki asire yon bò pral gen yon fini glas.
Deskripsyon
| Kalite | Klas | Klas | % konpozan chimik | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Lòt | |||
| Austenitic | 201 | SUS201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50-7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - |
| 202 | SUS202 | ≤0.15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0.060 | ≤0.030 | ≤1.00 | - | ≤0.25 | － | ||
| 301 | 1.431 | ≤0.15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | ≤0.10 | - | |
| 304 | 1.4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304H | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | 1.50-3.00 | - | - | - | |
| 316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316Ti | 1.4571 | ≤0.08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0.70 | |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 347 | 1.455 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10 * C% -1.10 | |
| 347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10 * C% -1.10 | |
| xm-19 | Nitronic50 | ≤0.06 | 20.50-23.50 | 11.50-13.50 | 4.0-6.0 | ≤0.045 | ≤0.030 | 1.50-3.00 | ≤1.00 | - | 0.2-0.4 | Nb:0.10-0.30 V:0.10-0.30 | |
| 904L | N08904 | ≤0.02 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | ≤0.045 | ≤0.035 | ≤1.00 | 0.1 | Cu: 1.0-2.0 | |||
| Duplex | 2205 | S32205 | ≤0.03 | 22.0-23.0 | 4.5-6.5 | ≤2.00 | ≤0.030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0.14-0.20 | |
| 2507 | S32750 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.20 | ≤0.035 | ≤0.020 | 3.0-5.0 | ≤0.80 | 0.5 | 0.24-0.32 | ||
| * | S32760 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.00 | ≤0.030 | ≤0.010 | 3.0-4.0 | ≤1.00 | 0.5-1.00 | 0.2-0.3 | ||
| 2304 | S32304 | ≤0.03 | 21.5-24.5 | 3.0-5.5 | ≤2.50 | ≤0.040 | ≤0.030 | 0.05-0.6 | ≤1.00 | 0.05-0.6 | 0.05-0.2 | ||
| 329 | 1.446 | ≤0.08 | 23.00-28.00 | 2.00-5.00 | ≤1.00 | ≤0.040 | ≤0.030 | 1.00-2.00 | ≤0.75 | - | - | ||
| Ferit | 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | ≤0.030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0.040 | ≤0.030 | - | ≤1.0 | - | - | - | |
| 444 | S44400 | ≤0.025 | 17.50-19.50 | 1 | ≤1.00 | ≤0.040 | ≤0.030 | 1.75-2.5 | ≤1.00 | - | 0.035 | Ti+Nb:0.2+4(C+N)~0.80 | |
| 446 | S44600 | ≤0.20 | 23.00-27.00 | 0.75 | ≤1.5 | ≤0.040 | ≤0.030 | 1.50-2.50 | ≤1.00 | - | ≤0.25 | - | |
| Martensite | 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 410S | * | ≤0.080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 416 | Y1Cr13 | ≤0.15 | 12.00-14.00 | 3) | ≤1.25 | ≤0.060 | ≥0.15 | - | ≤1.00 | - | - | - | |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 431 | 1Cr17Ni2 | ≤0.20 | 15.00-17.00 | 1.50-2.50 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤0.80 | - | - | - | |
| 440C | 11Cr17 | 0.95-1.20 | 16.00-18.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | 0.75 | ≤1.00 | - | - | - | |
| PH | 630 | 17-4PH | ≤0.07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | ≤0.50 | - | Al 0.75-1.50 | |
| 632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0.040 | ≤0.030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0.75-1.50 | |
Nerjaveèi asye Plak Plak Baogu Pwovizyon pou
| Sifas fini | Karakteristik ak aplikasyon |
| 2B | Sifas klète ak flatness pa 2B pi bon pase no2D.Lè sa a, atravè yon tretman sifas espesyal amelyore pwopriyete mekanik li yo, No2B te kapab prèske satisfè itilizasyon konplè. |
| No.1 | Poli ak senti abrazif nan gravye #100-#200, gen pi bon klète ak stria koryas diskontinu, yo itilize kòm refize pote bijou enteryè ak ekstèn pou bilding, aparèy elektrik ak istansil kwizin elatriye. |
| No.4 | Poli ak senti abrazif nan gravye #150-#180, gen pi bon klète ak stria koryas diskontinu, men pi mens pase No3, yo itilize kòm bilding basen enteryè ak orneman ekstèn aparèy elektrik istansil kwizin ak ekipman pwosesis manje elatriye. |
| HL | Poli ak senti abrazif nan gravye #150-#320 sou fini an NO.4 e li gen tach kontinyèl, sitou itilize kòm ornements bilding asansè, pòt nan bilding, plak devan elatriye. |
| BA | Fwad woule, klere rkwit ak po-pase, pwodwi a gen ekselan klète ak bon reflèktivite tankou glas, aparèy kwizin, orneman elatriye. |
| 8K | Pwodwi a gen ekselan klète ak pito reflèktivite ka yo dwe glas la. |
