410S bobin asye pur
Deskripsyon
Espesifikasyon:
1.Standard: ASTM A240, JIS G4304, EN10088
2. Klas: 200series&300series&400series
3. epesè: 0.03mm - 6.0mm
4. Lajè: 8mm-600mm
5. Longè: kòm demann kliyan yo
6. Sifas: 2D, 2B, BA, glas fini, N04, Liy cheve, Matt fini, 6K, 8K
7.Technology: frèt trase / frèt woule / cho woule
Materyèl:
| Kalite | Klas | Klas | % konpozan chimik | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Lòt | |||
| Austenitic | 201 | SUS201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50-7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - |
| 202 | SUS202 | ≤0.15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0.060 | ≤0.030 | ≤1.00 | - | ≤0.25 | － | ||
| 301 | 1.4310 | ≤0.15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | ≤0.10 | - | |
| 304 | 1.4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304H | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | 1.50-3.00 | - | - | - | |
| 316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316Ti | 1.4571 | ≤0.08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0.70 | |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 347 | 1.4550 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10 * C% -1.10 | |
| 347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10 * C% -1.10 | |
| Duplex | 2205 | S32205 | ≤0.03 | 22.0-23.0 | 4.5-6.5 | ≤2.00 | ≤0.030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0.14-0.20 | |
| 2507 | S32750 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.20 | ≤0.035 | ≤0.020 | 3.0-5.0 | ≤0.80 | 0.5 | 0.24-0.32 | ||
| Ferit | 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | ≤0.030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0.040 | ≤0.030 | - | ≤1.0 | - | - | - | |
| 444 | S44400 | ≤0.025 | 17.50-19.50 | 1 | ≤1.00 | ≤0.040 | ≤0.030 | 1.75-2.5 | ≤1.00 | - | 0.035 | Ti+Nb:0.2+4(C+N)~0.80 | |
| Martensite | 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 410S | * | ≤0.080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| PH | 630 | 17-4PH | ≤0.07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | ≤0.50 | - | Al 0.75-1.50 | |
| 632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0.040 | ≤0.030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0.75-1.50 | |
Enfòmasyon de baz
410s Nerjaveèi asye bobin, ak bon rezistans korozyon ak machinability, li se yon asye objektif jeneral ak asye zouti koupe.410S se yon kalite asye ki ka amelyore rezistans korozyon ak fòmabilite nan 410 asye.410S se yon asye fòs segondè ki ka plis amelyore rezistans nan korozyon nan 410 asye.Li se itilize pou lam turbine ak pati tanperati ki wo.
• Espesifikasyon: AISI 410s, ASTM 410s
• Fini: sifas Ba, sifas 2b, No.1 (blan po), sifas 2D, No.4 (frosted), HL (desen fil), sifas 8K gen bon jan kalite sifas ekselan.
•Mill tolerans sou epesè & flatness applies.Rele JM Steel si ou bezwen gwosè espesifik oswa direksyon grenn.
410S Teknoloji machin karakteristik
1D - Sifas la gen fòm granulaire discontinuous, ke yo rele tou sifas bwouya.
Teknoloji pwosesis: woule cho + piki annealing peening marinated + woule frèt + marinated annealing.
2D - Yon koulè blan yon ti kras ajan.
Teknoloji pwosesis: woule cho + piki annealing peening marinated + woule frèt + marinated annealing.
2B - Ajan blan ak pi bon enteprete ak plat pase yon sifas 2D.
Teknoloji pwosesis: cho woule + annealing piki peening marinated + woule frèt + marinated annealing + trempe ak tanperaman woule.
Ba - Ekselan enteprete sifas, segondè reflektivite, tankou yon sifas glas.
Teknoloji pwosesis: cho woule + annealing piki peening marinated + woule frèt + annealing marinated + polisaj sifas + trempe ak tanperaman woule.
No.3 -- Bon enteprete, sifas grenn koryas.
Teknoloji pwosesis: polisaj ak tanperaman woule pou 2D oswa 2B ak 100 ~ 120 materyèl abrazif (JIS R6002).
No.4 -- Bon enteprete, liy amann sou sifas la.
Pwosesis pwosesis: polisaj ak tanperaman woule pou 2D oswa 2B ak 150 ~ 180 materyèl abrazif (JIS R6002).
HL -- Gri ajan ak tach cheve.
Teknoloji pwosesis: pwodwi 2D oswa pwodwi 2B ak granularite apwopriye nan materyèl abrazif pou polisaj sifas la se yon grenn abrazif kontinyèl.
MIRRO -- Espekilè.
Teknoloji pwosesis: pwodwi 2D oswa pwodwi 2B ak granularite apwopriye nan materyèl la fanm k'ap pile fanm k'ap pile ak polisaj nan efè a glas.
